Kyocera KM-P4845w, KM-P4850w manual Paper

CHAPTER 3 GETTING READY FOR PRINTING

2. Paper

(1) Paper Type

Note the following restrictions on paper that can be used in this machine.

●Compatible paper

1.Paper source 1 (option), paper source 2, and paper source 3

• Paper roll width: 17" to 36" [210 to 920 mm]

• Paper roll outer diameter: 6 3/4" [180 mm] or less

• Paper roll inner diameter: 3" [76 mm (75.2 to 77.2 mm)]

• Acceptable paper roll types Plain paper (64 to 80 g/m2) Vellum

Film

In case of Memory...

Paper length differs depending on the memory used for this Printer.

Available	128 MB	256 MB	512 MB
memory
3.0 ppm		11" to 118"	11" to 236"
printer		[297 to 3000	[297 to 6000
		mm]	mm]
		(as Standard)
2.6 ppm	11" to 48"	Not available	Not available
printer	[297 to 1189
	mm]
	(as Standard)

2. Bypass

•Paper sizes (standard paper): 8 1/2" x 11" to 36" x 48" [A4 portrait to A0]

•Paper width: 8 1/2" to 36" [210 to 920 mm]

•Paper length: 11" to 48" [297 to 1189 mm]

•Acceptable paper materials Plain paper (64 to 80 g/m2) Vellum

Film

●Unacceptable paper

•Paper other than the paper described in “● Compatible paper”

•Paper with staples, etc.

•If paper is wrinkled, folded or broken, unroll the paper until the problem disappears and cut the paper before using it.

●Automatic paper width detection

If the paper roll that has been set is of a standard size, the paper width will be automatically detected. The following sizes can be detected.

Inch specifications	Metric specifications
<Architecture>	<A sizes>
36"	A0: 841mm
30"	A1: 594mm
24"	A2: 420mm
18"	A3: 297mm
15"	A4: 210mm
12"
9"
<Engineering>	<B sizes>
34"	B1: 728mm
30"	B2: 515mm
22"	B3: 364mm
17"	B4: 257mm
15"

11"

8 1/2"

NOTE

•Automatic detection will not function for the bypass.

•Paper width of non-standard sizes can be registered. See “1. Paper width” in the default setting. (Page 5-6)

•For switching between standard sizes (architecture/engineering [A sizes/ B sizes]), see “9. Standard size” in the default settings. (Page 5-9)

●Storage of paper

If the machine is not used for an extended period time, remove the paper roll and return it to its original packaging and reseal it.

IMPORTANT

•Vellum

Since vellum is very susceptible to its environment, when it is not used, put it in a plastic bag and seal it.

•When using vellum at a high humidity or at a low temperature, vellum will become fragile, resulting in wrinkles prints or missing images. If images are not properly printed, perform the following procedure.

*When using cut vellum:

Change the orientation of the paper (portrait or landscape).

*When using a vellum roll:

Unroll 1 length of paper and cut the paper before using it.

•When using roll paper whose surface is contaminated with adhesive, remove the adhesive or unroll the paper until the adhesive is no longer visible and cut off the unusable length.

3-6