Kyocera KM-P4850w, KM-P4845w manual Configuration by manager

CHAPTER 5 MANAGEMENT AND SETTING

●Configuration by manager

1 Press the */Menu key.

2	Press the N or M key to select “2. Set/manager”.
	Inch specifications
	Menu:
	3.Set/manager
	Metric specifications
	Menu:
	3.Set/manager
3
	Press the Enter key.
4	Use the MNOP cursor keys to input the pin code (the
	default setting is qQrR).
	Inch specifications
	Enter pin code.
	_	_	_	_
	Metric specifications
	Enter pin code.
	_	_	_	_

NOTE

The pin code may be changed (see “11. Mgr. code change” on page 5-10).

5	Press the N or M key to select “1. Set machine”.
	Inch specifications
		Set/manager:
		1.Set machine
	Metric specifications
		Set/manager:
		1.Set machine
6
	Press the Enter key.
7	key.Press the N or M key to select a setting and press the Enter
	Inch specifications
		Set Machine:
		1.Paper width
	Metric specifications
		Set Machine:
		1.Paper width
	Configure each item, referring to the following pages:
	1.		Paper width···Page 5-6
	2.		Media Type [Pre-set Temp.]···Page 5-6
	3.		Paper type [Paper material]···Page 5-6
	4.		Roll end···Page 5-7
	5. Auto shutoff···Page 5-7
	6. Timer set···Page 5-8
	7.		Fusing temp.···Page 5-9
	8.		Custom paper···Page 5-9
	9.		Standard size···Page 5-9
	10. Buzzer···Page 5-10
	11. Mgr. code change···Page 5-10
	* The “*” in a list of setting options indicates the current
		setting.
	To configure another item, return to step 6.
8	To complete configuration, press the N or M key to select

“End” [“back”] and press the Enter key.

NOTE

•After each item has been configured, press the */Menu key to return to the “Ready to print.” screen.

•If you make a mistake when configuring an item, press the */Menu key. The display will return to the “Ready to print.” screen, leaving the setting unchanged.

9 Presskey. the N or M key to select “End” and press the Enter

5-5