![](/images/new-backgrounds/1105120/10512073x1.webp)
CHAPTER 5 MANAGEMENT AND SETTING
Setting | Description | Selectable values | Default |
|
|
|
|
9. Standard size | Select either “Architecture” or “Engineering” [“A sizes” or “B | Architecture/ | Architecture |
| sizes”] for the paper size. This will change the media widths | Engineering | [A sizes] |
| that are automatically detected by the printer. | [A sizes/B sizes] |
|
|
|
|
|
10. Buzzer | When the printer runs out of paper or experiences a paper | ON/OFF | ON |
| jam during printing, this status can be conveyed by a buzzer |
|
|
| in addition to the messages displayed on the operation |
|
|
| panel. This feature is particularly convenient when the |
|
|
| printer is not located in the immediate vicinity of the operator. |
|
|
| The buzzer sounds at the following conditions: |
|
|
| • When the printer runs out of paper during printing; |
|
|
| • When the data page size and/or media type differ from |
|
|
| those of the selected paper tray; |
|
|
| • When there is a paper jam; |
|
|
| • When the printer runs out of toner; |
|
|
| • When the waste toner tank is full; |
|
|
| • When the “Call service” message is displayed; |
|
|
| • When another printer error has activated the Attention |
|
|
| indicator on the operation panel. |
|
|
| * To stop the buzzer, press the Stop key or open and close |
|
|
| the front cover. |
|
|
|
|
|
|
11. Mgr. code | The password setting for manager can be changed. | – – – – – | qQrR |
change | * Using the MNOP cursor keys, select a |
|
|
| combination of the up/down/left/right arrows to set the pin |
|
|
| code. |
|
|
| * When changing the pin code, it is recommended that you |
|
|
| make a note of the new code. |
|
|
|
|
|
|
Page