Samsung HPN4239 manual Connecting to a PC, Pin Configuration, Setting up Your PDP Plug and Play

Connecting to a PC

Connection to a Macintosh computer may require in adapter.

PDP

Power Plug

Use the DVI-D	or
connection cable.
(sold separately)
DVI Cable	PC Cable	Audio Cable

PC

DVI jack

(The actual config- uration on your PC may be different, depending on the model.)

Connecting a PC to the PDP

1 Connect a PC (15pin) cable between the PC Output jack (or DVI jack) on the PC and the RGB IN(or DVI IN) Input jack (15p D-SUB) on the PDP.

2 Connect a Audio cable between the Audio (RGB or DVI) on the PC and the Audio L/R (RGB or DVI) input jacks on the PDP.

To watch the PC screen:

1.Turn on your PDP

2.Press the TV/VIDEO button on the remote control or SOURCE button on the front panel to select “PC”.

3.Turn on PC and check for PC system requirements. (Refer to pages 70 and 71 for PC system requirements.)

4.Adjust the PC screen. (Refer to pages 72 and 77.)

68

Pin Configuration

D-Sub Cable DVI-D Cable (Digital-Only Connector)

• 15Pin Signal Cable (based on protruded pin)

Setting up Your PDP (Plug and Play)

Our adoption of the new VESA Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system, without the usual setup hassles and confusion. Your PC system can easily identify and configure itself for use with your display. This monitor automatically tells the PC system its Extended Display Identification data (EDID) using Display Data Channel (DDC) protocols.

69