10Connecting
Connecting to your TV
Connecting antenna
Antenna connection
Connecting Video / Audio cable
Connect the VIDEO/AUDIO OUTPUT on the unit to VIDEO/AUDIO IN on TV with A/V cable, such as VIDEO with yellow, AUDIO Left/Right with white/ red.
2
Connecting
Connect the Terrestrial TV antenna to the ANTENNA IN jack on the unit. If you want to use an indoor antenna, use one with a signal amplifier rated at 5V, 100mA and set [Antenna Feed 5V] to [ON] in the setup menu (See page 17)
Antenna connection to your TV
Connect one end of the RF cable to ANTENNA OUT jack on the unit and other end to ANTENNA IN jack on your TV. Passes the signal from the ANTENNA IN jack to your TV/monitor.
A/V Cable
TV
Rear of the Unit
Rear of the Unit
RF Cable
TV
COAXIAL | ANTENNA IN |
Connecting SCART cable
Connect the TO TV jack on the unit and your TV using the SCART cable.
For SCART connections, resolution must be set to 576i(480i) by pressing RESOLUTION button.
Rear of the Unit
SCART
Cable
VIDEO IN L | TV |
YPB
COMPONENT VIDE
yy You must set the [TV Output Select] option to [RGB] on the setup menu to use this connection.