Connecting 11
Connecting Component Video cable
Connect the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit to the corresponding input jacks on the TV using Component video cable, such as Y with green, Pb with blue, and Pr with red.
Rear of the Unit
Component
Cable
TV
yy You must set the [TV Output Select] option
to [YPbPr] on the setup menu to use this connection.
yy You should still connect the AUDIO cable between the unit and TV.
Connecting HDMI cable
Connect the HDMI OUTPUT on the unit to the HDMI IN on compatible TV with HDMI cable. (Type A, High Speed HDMI™ Cable)
Rear of the Unit
HDMI Cable
TV
COAXIAL
Additional Information for HDMI
yy When you connect a HDMI or DVI compatible device, make sure of the following:
yy Not all
Resolution Setting
The unit provides several output resolutions for HDMI OUTPUT and COMPONENT / PROGRESSIVE SCAN OUTPUT jacks. You can change the resolution using RESOLUTION button.
yy The unit is able to provide a 1080p full HD image to most
yy For 720p, 1080p and 1080i resolution on the Component / progressive scan output, only non- copy protected discs can be played back. If the disc is copy protected, it will be displayed at the 576p(480p) resolution.
yy Depending on your TV, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press RESOLUTION repeatedly until the picture
2
Connecting