Motorola 579765-003-00 Rear View, Enable Wireless Protected Setup WPS on your Wi-Fi devices

When all of your connections are made, your network may look like this:

Rear View

	Ethernet
	Ports	WPS
DSL Port		Pushbutton

Power Switch

DC Power

ENGLISH

4.Enable Wireless Protected Setup (WPS) on your Wi-Fi devices.

Adding wireless clients to your network is easier using Wireless Protected Setup (WPS). Older, non-WPS clients can still be added to the network by configuring them the stan- dard way with WPA-PSK.

Make sure your wireless clients are running. Press the WPS push-button to begin the exchange, which may last up to two minutes.

Do not power off your Gateway during the exchange.

The Gateway will display a success message when the exchange has completed.

Note: Not all client wireless devices support WPS. Refer to their documentation.

5