5
Troubleshooting
24Troubleshooting
Troubleshooting
Symptom | Cause | Solution |
|
|
|
No power | The power cord is disconnected. | Plug the power cord into the wall outlet |
|
| securely. |
|
|
|
The power is on, but | No disc is inserted. | Insert a disc. |
the unit does not work. |
|
|
|
|
|
The unit does not start | An unplayable disc is inserted. | Insert a playable disc. (Check the disc type |
playback. |
| and regional code.) |
|
|
|
| The rating level is set. | Change the rating level. |
|
|
|
The remote control | The remote control is not | Point the remote control at the remote |
does not work properly. | pointed at the remote sensor | sensor of the unit. |
| on the unit. |
|
|
|
|
| The remote control is too far | Operate the remote control closer to the unit. |
| from the unit. |
|
|
|
|
Poor picture quality | Fingerprints and dust are | Wipe the disc from the center to out with |
and sound distortion | stained on the disc. | a clean cloth. Do not use strong solvents. |
|
| (alcohol, benzine, thinner, commercially |
|
| available cleaners) |
|
|
|
No picture | The TV is not set to receive the | Select the appropriate video input mode on |
| signal from the unit. | the TV. |
|
|
|
| The video cable is not | Connect the video cable securely. |
| connected securely. |
|
|
|
|
| The video cable is not | Press RESOLUTION repeatedly to select |
| connected securely. | appropriate resolution. |
|
|
|
No sound | The equipment connected with | Select the correct input mode of the audio |
| the audio cable is not set to | amplifier. |
| receive the signal from the unit. |
|
|
|
|
| The AUDIO options are set to | Set the AUDIO settings to the correct |
| the wrong position. | position. |
|
|
|
