LG Electronics DVT699H Connecting to an, Amplifier, Connecting Audio cable, Connecting HDMI cable

2

12 Connecting

Connecting to an	sampling frequency, set the [Sample Freq.]
Amplifier	yy If your TV is not capable of handling 96 kHz
	option to [48 kHz] on the setup menu.
	yy If your TV is not equipped with Dolby Digital
	and MPEG decoder, set the [Dolby Digital] and
Connecting Audio cable	[MPEG] options to [PCM] on the setup menu.
	yy Changing the resolution when the unit is
Connect the AUDIO OUTPUT on the unit to 2CH
	connected with HDMI connector may result in
AUDIO IN on amplifier with Audio cable, such as	malfunctions. To solve the problem, turn off the
AUDIO Left/Right with white/red.	unit and then turn it on again.

Connecting

Rear of the Unit

Audio

Cable

Receiver / Amplifier

,,Note

yy If the audio format of the digital output does not match the capabilities of your amplifier, the amplifier will produce a strong, distorted sound or no sound at all.

yy To see the audio format of the current disc in the on-screen display, press AUDIO.

yy This unit does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible amplifier via one of this unit’s digital audio outputs.

Connecting COAXIAL (digital audio) cable

Connect one of the unit’s DIGITAL AUDIO OUTPUT (COAXIAL) jacks to the corresponding jack on your amplifier.

Rear of the Unit

Coaxial

Cable

Receiver / Amplifier

OPTICAL

Connecting HDMI cable

Connect the HDMI OUTPUT on the unit to the HDMI IN on amplifier with HDMI cable.

(Type A, High Speed HDMI™ Cable).

Connect the HDMI OUT jack on amplifier to HDMI IN jack on TV with HDMI cable, if the amplifier has HDMI OUTPUT jack.

Rear of the Unit

HDMI

Cable

TV

COAXIALOUT

Receiver /

HDMI Amplifier

Cable