Kyocera KX18 manual Answering the phone, Answering automatically

To activate the Voice Wake-up setting:

1.Select Menu → Settings → Voice Features → Voice Wake-Up →

With accessory.

2.Select Menu → Settings → Keyguard → Disabled, then press the Amp’d/OK key .

To wake up the phone:

1.Say “Wake Up” and listen for a tone.

2.Say “Wake Up” again until you hear two tones.

If the phone does not recognize your “Wake up” command, see “Training voice recognition” on page 83.

Answering the phone

You can set your hands-free car kit to

(1)answer automatically or (2) answer using a voice command.

Answering automatically

You can set your phone to answer automatically.

Note: This setting also works with the portable hands-free car kit.

•Select Menu → Settings → Accessories → Auto-Answer → After 5 secs.

Answering using voice commands

If Auto-Answer is turned off, you can use a voice command to answer an incoming call using the installed hands-free car kit.

•Select Menu → Settings →

Accessories → Auto-Answer → Disabled.

To activate the Voice Answer setting:

1.Select Menu → Settings → Voice Features → Voice Answer.

2.Highlight Enabled and press the Amp’d/OK key .

3.Select Menu → Settings →

Silent Mode → Normal Sounds, then press the Amp’d/OK key .

To answer a call:

When you receive an incoming call, the phone responds: “Incoming call, answer?” or “Incoming roam call, answer?” If the caller is recognized as a contact entry in your phone, then the phone will say “Incoming call from (Name), answer?”

•Say “Yes” or press any key except the End/Power key .

Ignoring an incoming call

To ignore an incoming call, do one of the following:

•Say “No” and press the End/Power key to silence the alert.

•Remain silent. The voice alert repeats twice and the phone rings once, then returns to the home screen.

PAGE 82 MAKING A CALL USING DIGIT DIALING USING VOICE RECOGNITION