Kyocera KX5 manual Making a call, Answering a call, Making and Answering Calls

2MAKING AND ANSWERING CALLS

Making a call

Make sure you are in an area where a signal can be received. Look for the symbol on the home screen. The more bars you see in this symbol, the stronger the signal. If there are no bars, move to where the signal strength is better.

When the phone has been idle for a time, it changes to power save mode. When you see “Power Save” on your phone’s screen, press any key to return to normal operating mode.

Slide open

1.Open the slide.

2.Enter the phone number and press .

3.Press or close slide (if “Close to End” is enabled. See “Ending calls using the slide”).

Slide closed

You can only use the voice dialing feature when calling with the slide closed. Voice dialing requires that a contact be saved with a voice tag. See page 61.

1.Press and hold to initiate voice dialing.

2.Say the name of the contact when prompted. The phone places the call.

3.Press once.

Ending calls using the slide

You can set the phone to end calls immediately when you close the slide.

•Select Menu → Settings → Convenience → Close to End → Enabled

–Select Disabled to have the phone call continue when you close the slide.

Answering a call

When a call comes in, the phone rings, vibrates, or lights up, and a dancing phone icon appears. The phone number of the caller also appears if it is not restricted. If the number is stored in your Contacts directory, the contact name appears.

Slide open

•Press to answer the incoming call. -or-

•Press to answer the incoming call and turn on the speakerphone.

Slide closed

• Press to select Answer Call.

Answering calls using the slide

You can set the phone to answer immediately when you open the slide. This feature does not apply to incoming data or fax calls.

User Guide for the Kyocera Slider Remix KX5 Phone 9