Kyocera KX5 Installing the battery, Charging the battery, Getting Started, Recharging the battery

1GETTING STARTED

Installing the battery

Your Kyocera KX5 phone comes with a removable lithium ion (LI Ion) battery. Fully charge the

battery before using the phone.

To install the battery:

1.Hold the phone face

down.

2.Slide the tab at the bottom of the door up and remove the battery door.

3.Place the battery in the

phone casing with the metal contacts facing the right side of the phone.

4.Replace the battery

door by sliding the notches into the openings near the

top of the phone.

5.Lower the battery door

and slide the tab at the bottom of the door up and then down to secure the cover into place.

Charging the battery

You must have at least a partial charge in the battery to make or receive calls.

To charge the battery:

1.Connect the AC adapter to the jack on the bottom of the phone.

2.Plug the adapter into a wall outlet.

The battery icon in the upper-right corner of the screen tells you whether the phone is:

•Charging (the icon is animated)

•Partially charged

•Fully charged

Note: The battery will not charge if you use the phone while it is connected to an AC adapter.

Recharging the battery

You can safely recharge the battery at any time, even if it has a partial charge.

Note: To remove the battery, make sure the phone is powered off.

User Guide for the Kyocera Slider Remix KX5 Phone 1