Kyocera KX5 Tips before operating your camera, Accessing camera and video modes, Using the Camera

5USING THE CAMERA

Tips before operating your camera

•You cannot activate the camera while

on an active call or while browsing files in the media gallery.

•Once the camera is active, the home screen acts as the viewfinder.

•If you get a “Low memory” error, check your resolution and quality compression settings. See “Setting up the camera” on this page.

•If there is no activity within 45 seconds after you turn your camera on, the camera quits and returns to the previous launch point.

•Menu settings and options can only be accessed when the camera is active.

Accessing camera and video modes

The camera can be used with the slide open or closed.

Slide closed

•Press until you hear one beep to activate camera mode.

•Press until you hear two beeps to activate video mode.

Slide open

•Press until you hear one beep to activate camera mode.

•Press until you hear two beeps to activate video mode.

Setting up the camera for photos

1.With the slide open, select Menu → Camera.

2.Press to select Options .

3.Press to select Settings.

4.Highlight an option and press :

–Flash options are On, Off, or Automatic.

–Resolution options are 1280 x 960 (best for printing), 640 x 480, 320 x 240 (best for sending to email), and 160 x 120.

–Low Light Mode brightens the picture for low light environments.

–Self Timer options are Off (default) or 3, 5, or 10 second pauses. When set, the camera beeps from 3 seconds down to the time the shutter snaps the picture automatically. Self Timer is not available when Multishot mode is activated.

User Guide for the Kyocera Slider Remix KX5 Phone 23