Kyocera M2000 manual Power Phone Up

2	Call Features
This section describes the basic features related					Call Using Voice Commands
to calls.					You can use voice commands to call a contact
Power Phone Up					from your voice dial list or to dial a phone
					number. For more information, see “Voice
•	To turn your phone on, press the			key and	Commands” on page 69.
	wait until the phone display lights up.				Redial a Number
• To turn your phone off, press and hold the
	key until the phone plays a musical				1.	Press the		key once to open your call
	chime and turns off.					history.
Make Phone Calls					2.	Highlight a phone number or contact and
						press the		key.
Make sure you are in an area where a signal can						To redial the last number called, received
be received. Look for the signal strength icon on
					or missed, presspÉåÇthe				key three times.
the main screen. The more bars, the stronger the
signal. If there are no bars, move to where the					Answer Phone Calls
signal strength is better.					When a call comes in, the phone rings, vibrates,
When the phone has been idle for a time, it
					or lights up. The phone number of the caller also
changes to power save mode. Press any key to
					appears if it is not restricted. If the number is
return to normal operating mode.
					stored in your contacts list, the contact’s name
There are several ways you can make a phone
					appears. There are several ways you can answer a
call.					phone call.
Call Using a Number					Answer Using Earpiece
1.	Enter a phone number.				Press the		key.
2.	Press the		key.		Answer Using Speakerphone
Call Using a Contact
					Press the				key.
1.	From		, highlight a contact.
2.	Press the		key.	båÇ	kçíÉW=			pÉåÇ
	båÇ
10		pÉåÇ					p			Power Phone Up
							éÉ~âÉêéÜçåÉÉåÇ