LA Audio Electronic EQX20

Page 14

Kick drum Slap at 3-5kHz Floppy around 600-650Hz

Bass at 40-125Hz Boomy below 80Hz

Snare drum Crack at 2-3kHz 'In the way' 1kHz

Body at 125Hz to 300Hz

Bottom 80Hz

Contents

Main Dual 3 Band, Mono 6 Band Param etri c Equali ser OPERATION MANUAL Page CONTENTS 1.0 INTRODUCTION 2.0 INSTALLATION Signals in excess of +20dB will cause the unit to distort. Plugging a mono jack lead into the TRS input will effectively un-balance the signal connection. 3.0 WARRANTY 4.0 DESCRIPTION OF CONTROLS Maximum cut or boost occurs at the centre frequency set by the FREQUENCY control. In general lower Qs are used when boosting and higher Qs when cutting - see applications Page Page 5.0 APPLICATIONS