battery cover to fall away from the unit. Place the screw partially back into the hole and angle it slightly, so the threads grab the battery cover. With the screw, pull the battery cover off.

3.Observing the correct polarity, install 2 AAA batteries. The batteries will fit tightly—make sure they do not spring free, or start-up problems may occur.

4.Check the LCD screen of the Remote Control Sender to see if there is a temperature reading. If there is no reading check the polarity of the batteries or replace with new batteries.

5.Observing that the rubber weather-seal is in place; replace battery cover, screw, and mounting bracket.

4

Page 7
Image 7
La Crosse Technology WS-7054U instruction manual