III)DST (DAYLIGHT SAVING TIME) SETTING
Note: The DST default is “On”, meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST “OFF”.
1)Hold down the “SET” button for 2 seconds (the selected time zone will flash), press the “SET” button once more until “On” flashes in the time LCD and “DST” flashes where the Weekday normally appears.
2)Press the “+” button to turn the DST off, as will be indicated by the display of “OFF” in the time LCD.
3)Press the “SET” button to confirm the DST setting, and to advance to select the language for the weekday.
IV) LANGUAGE SELECTION FOR THE WEEKDAY
1)Hold down the “SET” button for 2 seconds (the selected time zone will flash), press the “SET” button 2 more times, until the default language “US” flashes in the time LCD.
2)Press the “+” button to toggle through and to select the desired language. There are 3 languages to select from:
US
F
E
English
French
Spanish
3)Press the “SET” button to confirm the language setting, and to advance to manually set the time.
V)TIME SETTING
Note: When the WWVB signal is found, that time will
1)Hold down the “SET” button for 2 seconds (the selected time zone will flash), press the “SET” button 3 more times, until the hour “12” flashes in the time LCD.
2)Press the “+” button to select the hour. Note: when setting the hour, “PM” will appear to the left of the hour display, if it is AM nothing will be displayed.
3)Press the “SET” button to confirm the hour setting, and to shift to select the minutes.
4)Press the “+” button to select the minutes.
5)Press the “SET” button to confirm the time setting, and to advance to manually set the calendar.
6
