TROUBLESHOOTING
Problem: | The LCD is faint. | |
Solution: | 1) | Replace the batteries. |
Problem: | “OFL” appears in the indoor temperature LCD. | |
Solution: | 1) | Move unit to an area with warmer or cooler surrounding |
| temperature. Current surrounding temperatures are outside | |
| measuring range. | |
Problem: | No reception of WWVB signal. | |
Solution: | 1) | It may help reception to face the front of the temperature |
|
| alarm in the general direction of Ft. Collins, Colorado. |
| 2) | Wait overnight for signal. |
| 3) | Be sure the temperature alarm is at least 6 feet from any |
|
| electrical devices, i.e. TV sets, computers, or other radio |
|
| controlled clocks. |
| 4) | Remove batteries for five minutes, reinsert and leave the unit |
|
| alone overnight without pressing buttons. |
| 5) | If problems persist contact La Crosse Technology. |
Problem: | Hour is incorrect (minute and date are correct). | |
Solution: | 1) | Be sure correct time zone and daylight saving time are |
| selected. | |
Problem: | ||
Solution: | 1) | Check batteries in remote |
| 2) | If batteries are replaced in remote, the unit must be |
| Remove all batteries, and then follow start up procedure. | |
Problem: | “OFL” appears in the outdoor temperature LCD | |
Solution: | 1) | Remote temperature is out of range. |
| 2) | Check batteries. |
| 3) | Interference from an outside source (cordless telephone, etc.) |
| 4) | Contact La Crosse Technology. |
Note: For any questions not answered, contact La Crosse Technology with the contact information found at the end of this instructional manual.
13
