La Crosse Technology WS-8056U II Program Mode, Function Buttons, Time Zone Setting

II)PROGRAM MODE

To enter the program mode hold down the “SET” button for 2 seconds, until “-5EST” flashes in the date LCD. The program mode is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the temperature alarm. Complete programming is usually done for the initial set-up, and will require you to skip step 1 of programming sections III through VIII. Press the “SNOOZE” button at any time to exit the program mode, or wait approximately 15 seconds for the temperature alarm to automatically return to normal operation.

A)FUNCTION BUTTONS

There are 3 function buttons located on the front of the temperature alarm and one on the top. The function buttons are labeled: “SET”, “+”, “ALARM”, and “SNOOZE” (the top bar).

B)TIME ZONE SETTING

1)Hold down the “SET” button for 2 seconds,

the default setting “-5EST” will flash in the date LCD.

2)Press and release the “+” button to select the appropriate time zone. There are 13 time zones to choose from:

-4ATL	Atlantic Time
-5EST	Eastern Time (default setting)
-6CST	Central Time
-7MST	Mountain Time
-8PST	Pacific Time
-9ALA	Alaskan Time
-10HAW	Hawaiian Time
-11, -12	Next two time zones West of HAW
GMT	Greenwich Mean Time
-1, -2, -3GMT	Three time zones West of GMT

3)Press and release the “SET” button to confirm the time zone setting, and to advance to DST (Daylight saving time) setting.

6