![TROUBLESHOOTING](/images/new-backgrounds/98080/9808017x1.webp)
permanently mounting.
A.
1.Remove the mounting bracket from the
2.Mount using either screws or adhesive tape.
3. Reattach the
B. WIRELESS WEATHER STATION
1.The Wireless Weather Station comes with the table stand attached to the back of the Receiver. If you wish to use the table- stand, simply place the Wireless Weather Station in an appropriate
location, and pull out on the attached stand.
2.To wall mount, push the table stand flat against the Wireless Weather Station (if it isn’t already flat). Fix a screw (not included) into the desired wall, and place the Wireless Weather Station onto the screw using the hanging hole on the backside. Gently pull the Wireless Weather Station down to lock the screw into place.
TROUBLESHOOTING
NOTE: For problems not solved, please contact La Crosse Technology via
Problem: The LCD is faint
Solution: Replace batteries
Problem: No outdoor temperature is displayed.
Solution:
1)Bring any units from outside, inside and place the units 3 to 5 feet apart with nothing
2)Remove the batteries from all units.
3)Press one of the buttons on the Wireless Weather Station display at least 20 times to clear all memory. Verify that the display is blank before proceeding.
4)Using good quality alkaline batteries, place the batteries back into the outdoor temperature sensor; making sure they are installed according to the diagrams in the battery compartment.
5)Taking care not to press any buttons, reinstall the batteries in the Wireless Weather Station according to the diagram in the battery compartment.
6)Do not press any buttons for at least 15 minutes after installing the batteries. (This is to let the units establish a good connection.)
7)During the course of the 15 minutes an outdoor temperature should appear on the display. You can now put your sensor(s) back outside.
MAINTENANCE AND CARE
•Extreme temperatures, vibration, and shock should be avoided to prevent damage to the units.
9