Battery Change:
It is recommended to replace the batteries in the unit approximately every 3 years to ensure optimum accuracy.
FUNCTION KEYS
The simple design of this product features 2 keys.
RESET/+ Key:
•Press for 5 seconds to reset the TOTAL rainfall data “0”.
•Press and release to advance the value for the alarm.
ALM/SET:
•Press and release to activate/deactivate alarm
•Press for 5 seconds to enter alarm setting
OPERATIONS
Setting the Alarm
•Press and hold the ALM/SET button until the alarm is flashing on the bottom screen.
•Advance the alarm value by pressing and releasing the RESET/+ button.
•Alarm can be set in 0.05” increments from 0.05” to 4.00”
•The icon ((•)) will appear when the alarm is turned ON.
•Press and release ALM/SET button to turn the alarm off.
•To view the alarm pres and hold the ALM/SET button. This will cause the receiver to beep if the set alarm value has already been reached.
Resetting TOTAL RAINFALL and 24 HOUR RAINFALL
•Total Rainfall: Press and hold the RESET/+ button. The receiver will beep, and the total rainfall will reset to 0.00”.
•24 Hour Rainfall: To reset the 4 Hour Rainfall “0.00”, remove the batteries, wait 2 minutes, and then
Note: The 24H Rainfall ready will not reset to “0.00”. Instead the value will update every hour.
The 24H Rainfall will only show “0.00” if there was no rain for a full period of 24 hours.
6
