La Crosse Technology WS-9016U instruction manual Problem, Solution

Problem:		No reception of WWVB time signal
	Solution	1) Wait overnight for signal.
	:	2) Be sure indoor weather station is at least 6 feet
			from any electrical devices, such as televisions,
			computers, or other radio-controlled clocks.
		3)	Remove batteries for five minutes, reinsert and
			leave alone without pressing buttons overnight.
		4)	If there are still problems, contact La Crosse
			Technology
Problem:		Hour is incorrect (minute and date are correct)
Solution:		Be sure correct time zone and daylight saving time
		are selected.
Problem:		The LCD is faint
Solution:		1)	Set the LCD contrast to a higher number
		2)	Replace batteries
Problem:		No remote temperature is displayed
Solution:		1)	Remove all batteries, reinsert into remote
			sensor(s) first, then indoor weather station.
		2) Place remote sensor(s) closer to indoor weather
			station.
		3)	Be sure all batteries are fresh.
Problem:		Remote humidity displays “- -“
Solution:		1) A temperature only sensor is being used and
			displayed
		2) The humidity is outside the range of 19-95%

NOTE: For problems not solved, please contact La Crosse Technology.

26