La Crosse Technology WS-9037U-IT manual Install and Replace Batteries in the Temperature Sensor

INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE SENSOR

The temperature sensor uses 2 x AA, IEC LR6, 1.5V battery. To install and replace the batteries, please follow the steps below:

1.Remove the battery compartment cover.

2.Insert the batteries, observing the correct polarity (see marking).

3.Replace the battery cover on the unit.

Note:

In the event of changing batteries in any of the units, all units need to be reset by following the setting up procedures. This is because a random security code is assigned by the sensor at start-up and this code must be received and stored by the Temperature Station in the first 3 minutes of power being supplied to it

BATTERY CHANGE:

It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units (Battery life see Specifications below).

11