La Crosse Technology WS-9057U Low Battery Indicator, About The Outdoor Transmitter

2.Use OUT/+ key to view the MIN/MAX temperature and humidity data for the selected transmitter.

3.To reset the minimum and maximum temperature and humidity data, and the times at which they were recorded, press the SET key continuously for about 3 seconds. This will reset the MIN/MAX data recorded to the current time, date, temperature and humidity.

The current time taken is the normal displayed time and does not regard the time zone set for the unit.

Note: The MIN/MAX data for each transmitter needs to be reset separately.

LOW BATTERY INDICATOR

Low battery indicator is displayed on the LCD when the batteries in the weather station require changing.

ABOUT THE OUTDOOR TRANSMITTER

The range of the Thermo-hygro transmitter may be affected by the temperature. At cold temperatures, the transmitting distance may be decreased. Please keep this in mind when positioning the transmitters. Battery power may be reduced for the Thermo-hygro transmitter at cold temperatures.

37

happen accidentally, reset all units (see “Setting up” above), or transmission problems may occur.

The transmission range is around 300 feet from the Thermo-hygro transmitter to the Weather station (in open space). However, this depends on the surrounding environment and interference levels. If no reception is possible despite the observation of these factors, all system units have to be reset (see “Setting up” above).

POSITIONING THE WEATHER STATION

The Weather station provides the option of table standing or wall mounting the unit. Before wall mounting, please check that the outdoor data can be received from the desired locations.

TO WALL MOUNT:

1. Fix a screw (not supplied) into the desired wall, leaving the head extended out by about 0.2” (5mm).

2.Place the weather station onto the screw, using the

hanging hole on the backside. Gently pull the weather station down to lock the screw into place.

39

CHECKING FOR 915MHz RECEPTION

If the outdoor temperature and humidity data are not being received within three minutes after setting up (or outdoor display always show “- -. -” in the outdoor section of the Weather station during normal operation), please check the following points:

1.The distance of the Weather station or transmitters should be at least 5 to 6.5 feet (1.5 to 2 meters) away from any interfering sources such as computer monitors or TV sets.

2.Avoid placing the transmitters onto or in the immediate proximity of metal window frames.

3.Using other electrical products such as headphones or speakers operating on the 915MHz-signal frequency may prevent correct signal transmission or reception. Neighbors using electrical devices operating on the 915MHz-signal frequency can also cause interference.

Note: When the 915MHz signal is received correctly, do not re-open the battery cover of either the transmitter or Weather station, as the batteries may spring free from the contacts and force a false reset. Should this

38

FOLDOUT TABLE STANDS:

The foldout table stands legs are located on the backside. Simply unfold the stands on the back. Once the foldout table stands are extended, place the weather station in an appropriate location.

POSITIONING THE THERMO/HYGRO TRANSMITTER:

The remote thermo/hygro transmitter can be placed onto any flat surface or wall mounted using the bracket which doubles as a stand or wall mount base.

TO WALL MOUNT: 1. Secure the bracket onto a desired

wall using the screws and plastic anchors.

40