La Crosse Technology WS-9057U Manual Settings, Daylight Saving Time On/Off Setting Dst On/Off

*When the signal is successfully received by the Weather Station, the outdoor transmission icon will be switched on. If not successful, the icon will not be shown on LCD. The user can then easily see whether the last reception was successful (icon on) or not (icon off). A short blinking of the icon indicates that signal reception is currently taking place.

MANUAL SETTINGS:

The following manual settings can be changed when pressing the SET key:

∙LCD contrast setting

∙Time zone setting

∙DST ON/OFF setting

∙Time reception ON/OFF setting

∙12/24-hour format setting

∙Manual time setting

∙Calendar setting

∙°F/°C temperature setting

∙Air pressure setting (hPa / inHg)

∙Relative air pressure setting

∙Weather forecasting icon sensitivity setting

17

The time zone default of the Weather Station is “-5h”. U.S. time zones are negative numbers: –5h(EST), -6h(CST), -7h(MST) and –8h(PST).To set a different time zone:

1.The current time zone value starts flashing.

2.Use the OUT/+ key to set the time zone. The range runs from 0 to - 12 and then runs from +12 back to 0 in consecutive 1-hour intervals.

3.Confirm with the SET key and enter the Daylight saving time ON/OFF.

DAYLIGHT SAVING TIME ON/OFF SETTING (DST ON/OFF)

Flashing

1.“ON” will flash on the LCD and "DSt" will display.

2.Use the OUT/+ key to turn the daylight saving time function ON or OFF.

3.Confirm with the SET key and enter the Time reception ON/OFF setting.

19

Note: SET mode is entered by pressing and holding the SET key for 3 seconds. If you do not press any keys for 15 seconds while in SET mode, the Weather Station switches out of SET mode.

LCD CONTRAST SETTING:

Last digit flashing

The LCD contrast can be set within 8 levels, from LCD 0 to LCD7 (Default setting is LCD 4):

1.Press and hold the SET key until the digit starts flashing.

2.Use the OUT/+ key to view all levels of contrast.

3.Select the desired LCD contrast. Confirm with the SET key and enter in the Time Zone setting.

TIME ZONE SETTING:

Flashing

18

TIME RECEPTION ON/OFF SETTING:

Flashing

In areas where reception of the WWVB time is not possible, the WWVB time reception function can be turn OFF. The clock will then work as a normal Quartz clock. (Default setting is ON).

4.“ON” will start flashing on the LCD and "RCC" will display.

5.Use the OUT/+ key to turn OFF the time reception function.

6.Confirm with the SET key and enter the 12/24-hour format setting.

Note: If the Time Reception function is turned OFF, the clock will not attempt reception of the WWVB time. The time reception icon and the “WWVB” icon will not be displayed on the LCD. Time Reception must be set to "ON" for the WVVB atomic time to function.

20