Indiana
EVV – Evansville IND – Indianapolis
Kansas
DDC – Dodge City
K32 – Wichita
TOP – Topeka
New Mexico |
| |
ABQ – Albuquerque |
| |
West Virginia | ||
| ||
| CRW – Charleston | |
Nevada | ||
| ||
LAS – Las Vegas |
| |
RNO – Reno |
| |
|
| |
New York | Wisconsin | |
BUF – Buffalo | GBR – Green Bay | |
JFK – New York City | LSE – La Crosse | |
SYR – Syracuse |
| |
|
| |
Ohio | Wyoming | |
CLE – Cleveland | CPR – Casper | |
CMH – Columbus |
|
SNOOZE SETTING:
Flashing
The snooze time can be set OFF or to a maximum time of 30 minutes (default is 10 minutes):
1. | The snooze time (in minutes) digit will be flashing. Use the CH/ + key to set the |
| snooze time (in minutes). Each pressing of the key will increase the snooze time by 5 |
| minutes. The snooze can also be set OFF when the “OFF” digit is being displayed. |
2. | Confirm with the SET key and enter the “ºF/ºC temperature unit setting” or exit the |
| manual setting mode by pressing the SNOOZE/ SUN key. |
The Canadian cities are displayed as follows:
Code – City | Code – City | Code – City |
ALB – Calgary | QUE – Quebec | Van – Vancouver |
OTT – Ottawa | TOR – Toronto | WIN – Winnipeg |
29
°F/°C TEMPERATURE UNIT SETTING
Flashing
The default temperature reading is set to °F (degree Fahrenheit). To select °C (degree Celsius):
1.The “°F” will be flashing, use the CH/ + key to toggle between “°F” and “°C”.
2.Once the desired temperature unit has been chosen, confirm with the SET key and enter the “Weather Forecast Icon Sensitivity setting” or exit the setting mode by pressing the SNOOZE/ SUN key.
WEATHER FORECASTING ICON SENSITIVITY SETTING
For locations with rapid changes of weather conditions, the threshold can be set to a different level for faster display of changing weather conditions.
31
Note:
If the snooze time has been set “OFF”, the snooze function will not be activated.
30
Flashing
Flashing
1.The current sensitivity value will start flashing.
2.Using the CH/ + key to set the weather sensitivity level. There are 3 levels of setting: 1, 2 and 3; level 1 is the most sensitive setting, level 3 is the least sensitive setting (default setting is "2").
3.Confirm with the SET key and exit the Manual settings.
32
