La Crosse Technology WT-5600 instruction manual Quick SET-UP Guide

QUICK SET-UP GUIDE

1)Insert two AA batteries into the Projection alarm and/or plug into wall

2)Wait 10 minutes for WWVB reception.

3)If there is no WWVB reception, manually set the time and date (instructions in the Program Mode).

4)Program the settings.

5)Mount the WT-5600 in a suitable location, where WWVB signal can be received.

6)The projector will activate and remain on if the alarm clock is plugged in. If only batteries are used, the projector will only be activated when a button is pressed.

7)See the “Features” section for instructions on projection direction, etc.

4