La Crosse Technology WT-5600 Date Setting, 12/24-HOUR Mode, Daylight Savings Time

E.DATE SETTING

Note: When the WWVB signal is found, that date will over-ride the manually set date.

1.Hold down the “MODE/+” button for 2 seconds (the selected time zone will flash), press the “AL” button three times until the year flashes.

2.Press the “MODE/+” button to select the year.

3.Press the “AL” button to confirm the year and move to the month setting.

4.Press the “MODE/+” button to select the month.

5.Press the “AL” button to confirm the month and move to the day setting.

6.Press the “MODE/+” button to select the day.

7.Press the “AL” button to confirm the day and move to the 12/24 Hour display setting, or press the “SNOOZE” button to confirm the date and return to the display mode.

F.12/24-HOUR MODE

1.Hold down the “MODE/+” button for 2 seconds (the selected time zone will flash), press the “AL” button six times until “ :12” flashes in the time display.

2.Press the “MODE/+” button to toggle between 12 and 24-hour time display.

3.Press the “AL” button to confirm the time display setting and move to the Daylight Saving Time setting, or press the “SNOOZE” button to confirm the time display setting and return to the display mode.

G.DAYLIGHT SAVINGS TIME

Note: The DST default is “On”, meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST to “OFF”.

1.Hold down the “MODE/+” button for 2 seconds (the selected time zone will flash), press the “AL” button seven times until “ON” flashes in the date display area and “DST” flashes above the U.S. map.

2.Press the “MODE/+” button to toggle between “ON” and “OFF” modes.

3.Press the “AL” button to confirm the DST setting and complete the set-up.

FEATURES & OPERATIONS

A.FEATURES

1.Radio-controlled time and date

2.Projection of time

3.LCD light

4.Three modes of date/seconds display

5.Time alarm

8