La Crosse Technology WT-5600 Program Mode, Programming Sequence, Time Zone Setting

PROGRAM MODE

To enter the Program Mode, hold down the “MODE+” button for 2 seconds, until the time zone (“-5” default) flashes in the lower right. The Program Mode Guide is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the Projection Alarm. Complete programming is usually done for the initial set-up and will require you to skip step 1 of programming sections III through VIII. Press the “SNOOZE” button at any time to exit the Program Mode or wait approximately 15 seconds for the Projection Alarm to automatically return to normal operation.

A.PROGRAMMING SEQUENCE

1.Time Zone Setting

2.Hour Setting

3.Minute Setting

4.Year Setting

5.Month Setting

6.Day Setting

7.12/24-hour Mode

8.Daylight Saving Time On/Off

B.FUNCTION BUTTONS There are 5 function buttons located on the front of the Projection Alarm. The function buttons are labeled: AL, light intensity icon, light direction icon, MODE/+, and SNOOZE (the top bar).

C.TIME ZONE SETTING

PROJECTION

1.Hold down the “MODE/+” button for 2 seconds, the time zone (“-5” default) will flash in the Date LCD.

2.Press the “MODE/+” button to select the appropriate time zone. There are 13 time zones to choose from (based relative to the international time standard of GMT (“Greenwich Mean Time”).

6