LANCOM 821 ADSL/ISDN – LANCOM 1621 ADSL/ISDN – LANCOM 1711 VPN
Chapter 2: Installation
EN
The power LED flashes red/green in alternation until a configuration password has been specified. Without a configuration password, the configuration data of the LANCOM is insecure. Under normal circum- stances, you would assign a configuration password during the basic configuration (see instructions in the following chapter). For informa- tion about a later assignment of the configuration password see the section “Security settings” on page 66.
Flashing Power LED but no connection?
There's no need to worry if the Power LED blinks red and you can no longer connect to the WAN. This simply indicates that a preset time or
Reset connect charge protection. Increase the limit that has been reached.
Completely deactivate the lock that has been triggered (set limit to '0').
LANCOM 
Systems
Power
Signal for reached time or
If a time or connect charge limit has been reached, you will be notified in LANmonitor. To reset the connect charge protection, select Reset Charge and Time Limits in the context menu (right mouse click). You can configure the connect charge settings in LANconfig under Management / Costs (you will only be able to access this configuration if 'Complete con- figuration display' is selected under View / Options…).
You will find the connect charge protection reset in WEBconfig and all parameters under Expert Configuration / Setup /
Online | The Online LED indicates the overall status of all WAN ports: | ||
| off |
| No active connection |
|
| ||
|
|
|
|
| green | flashing | Establishing first connection |
|
|
|
|
| green | inverse flashing | Establishing further connection |
|
|
|
|
| green | constantly on | At least one connection established |
|
|
|
|
| red | constantly on | Error establishing the previous connection |
|
|
|
|
24
