EN
LANCOM 821 ADSL/ISDN – LANCOM 1621 ADSL/ISDN – LANCOM 1711 VPN
Chapter 3: Basic configuration
If you would like to configure the TCP/IP settings manually, assign an available address from a suitable address range to the LANCOM. Also set whether or not it is to operate as a DHCP server. Confirm your entry with Apply.
Enter the wireless parameters. Select a network name (SSID) and a radio channel. Turn on if necessary the function for ’closed network’. Confirm your choice with Next.
In the following 'Security settings' window, specify a password for config- uration access. Note that the password is
You may specify whether the device may only be configured from the local network or whether remote configuration via the WAN (i.e. a remote net- work) is also permissible.
Please note that enabling this will also permit remote configuration via the Internet. You should always make sure that the configuration access is suitably protected, e.g. with a password.
In the next window, select your DSL provider from the list that is displayed. Confirm your choice with Apply.
If you select 'My provider is not listed here,' you must enter the transfer protocol used by your DSL provider manually in the next window. Confirm your choice with Apply.
Connect charge protection can limit the cost of DSL connections to a pre- determined amount if desired. Confirm your choice with Apply.
Entering the password in the web browser
When you are prompted for a user name and password by your web browser when accessing the device in the future, enter your personal values to the corresponding fields. Please note that the password is
If you are using the common configuration account, enter the corresponding password only. Leave the user name field blank.
Entering the configuration password
40
