Lancom Systems 821, 1711, 1621 manual Settings for IPX, Settings for NetBIOS routing, User SAMPLE

LANCOM 821 ADSL/ISDN – LANCOM 1621 ADSL/ISDN – LANCOM 1711 VPN

Chapter 6: Providing dial- up access

6.1.3Settings for IPX

Two IPX network numbers must be provided for remote access to an IPX net- work:

the IPX network number of the head office

an additional IPX network number for the higher-level WAN

IPX internal net: 00020002

WAN

IPX network no.: Remote

00000009 workstation

VPN or ISDN

connection ISDN adapter

(0123) 123456	User: 'SAMPLE'
LAN of the head office	(0123) 777888
IPX network no.: 00000001, Binding: Ethernet_II

The required network numbers are designated as “External Network Num- bers”. Like IP network addresses, they apply to an entire LAN segment. On the other hand, internal IPX numbers are used to address specific Novell servers in the LAN. All three specified network numbers must be distinct from one another and from all used internal IPX network numbers.

In addition, it may be necessary to enter the frame type (“binding”).

Specifying the IPX network number and binding used is not necessary if the remote network also contains a Novell server. A network number for the WAN must also be entered manually in this case, however.

6.1.4Settings for NetBIOS routing

All that is required to use NetBIOS is the name of a Windows workgroup from the router's own LAN.

The connection is not established automatically. The RAS user must manually establish a connection to the LANCOM via Dial-Up Net- working first. When connected, they can search for and access com-

EN

57