16

Section 3 Adjustments

DM35 Series (S/N253045+) Disc Mowers 309-502M 7/18/08
Land Pride
Table of Contents
Belt Tension Adjustment
Figure 2-2 17896
17884
Belt Deflection
Figure 2-3
Cutting Height
Figure 2-4
15091
Maximum Cutting Height Minimum Cutting Height
Cutting Height
Refer to Figure 2-4:
Cuttingheight can be adjusted with the upper 3-point hitch
link.
Maximum cutting height of 2” is achievedwhen the discs
are parallel to the ground. Adjustment of cutting height is
achieved byalter ing the cutter bar tilt angle.This is done
by varying the upper 3-point hitch link length until desired
cutting height is achieved. Shorten the upper
3-point hitch link to lower and lengthen to raise.
Tominimize blade and disc wear, improve grass regrowth
and get maximum nutritive value from the crop,minimum
cutting height should never be adjusted less than 1 1/4“.