2
Important Safety Information
DM35 Series (S/N253045+) Disc Mowers 309-502M 7/18/08
Land Pride
Table of Contents
These are common practices that may or may not be applicable to the products described in
this manual.
TransportMachinery Safely▲Comply with state and local laws.
▲Maximum transport speed for
implement is 20 mph. DO NOT
EXCEED.Never travel at a speed
which does not allow adequate
control of steering and stopping.
Some rough terrains require a
slower speed.
▲Sudden breaking can cause a
towed load to swerve and upset.
Reduce speed if towed load is not
equipped with breaks.
▲Use the following maximum
speed - tow load weight ratios as
a guideline:
▲20 mph when weight is less than
or equal to the weight of tractor.
▲10 mph when weight is double
the weight of tractor.
▲IMPORTANT: Do not tow a load
that is more than double the
weight of tractor.
Use SafetyLights and Devices▲Slow moving tractors, self-
propelled equipment, and towed
implements can create a hazard
whendr ivenon public roads. They
are difficult to see, especially at
night.
▲Flashing warning lights and turn
signals are recommended
whenever driving on public roads.
Practice Safe Maintenance▲Understand procedure before
doing work. Use proper tools and
equipment, refer to Operator’s
Manual for additional information.
▲Work in a clean dry area.
▲Lower the implement to the
ground, put tractorin par k, turn off
engine, and remove key before
performing maintenance.
▲Allow implement to cool
completely.
▲Do not grease or oil implement
while it is in operation.
▲Inspect all parts. Make sure parts
are in good condition & installed
properly.
▲Remove buildup of grease, oil or
debris.
▲Remove all tools and unused
parts from implement before
operation.
Tractors With CabsTractors Equipped WithROPS▲There should be sufficient
clearance for the operator when
mounted to a tractor with a cab or
that is equipped with ROPS.
▲The ROPS may need to be
extended or flipped around to
obtain sufficient clearance.