Land Pride 4400NT Preparations for new Gearbox Mount, Refer to figure, Assembly Instructions

Land Pride

Assembly Instructions

Preparations for new Gearbox Mount

Refer to figure 4:

1.Clamp template plate (#1) to vehicle by aligning the front edge of template with the front edge of the engine mounting plate.

2.Drill two 1/8" pilot holes in engine plate using holes provided in the template.

23683

Front Edge of Template

1& Engine mounting Plate

Clamping

Drill 1/8"	Device
Pilot Holes
	Template Set-up
	figure 4

Refer to Figure 5:

3.Remove template and redrill pilot holes to 11/32" diameter.

1/8" Pilot Holes Drilled to 11/32"

23682

Pilot Holes Redrilled to 11/32" Diameter

Figure 5

Refer to Figure 6:

4.Assembly 2 3/4" lg. mounting bracket (#2) to gearbox mounting plate (#1) with two 5/16"-18 x 3/4" lg. GR5 hex head cap screw (#4), 5/16" flat washers (#6) and hex nylock nut (#5) as shown. Do not tighten.

5.Assembly 3 7/8" lg. mounting bracket (#3) to gearbox mounting plate (#1) with two 5/16"-18 x 3/4" lg. GR5 hex head cap screw (#4), 5/16" flat washers (#6) and hex nylock nut (#5) as shown. Do not tighten.

23679

Gearbox Mounting Plate Assembly

Figure 6

6/14/05 ■ Manual No. 700-372M 3