Retro Fit Gearbox Mount
Assembly Instructions
|
| Treker 4400NT & 4400ST Series |
| Manual No. | ||
|
|
|
|
| ||
|
| Before You Start |
| Assembly Instructions |
| |
|
|
|
|
|
|
|
When you see this symbol, the subsequent
!instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it!
IMPORTANT: Before you begin, read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation instructions for future reference and parts ordering information.
Your Land Pride Retro Fit Gearbox Mount is exclusively designed for Land Pride 4400NT & 4400ST Trekers. Please read these installation instructions and the vehicle Operator’s Manual thoroughly before beginning. Especially read information relating to safety concerns. Also included in the Operator’s Manual is important information on operation, adjustment, troubleshooting, and maintenance for this attachment (some manual sections do not apply to all accessories).
A separate Parts Manual for replacement parts can be purchased from your dealer or downloaded free of charge from our web site at www.landpride.com. Have model and serial numbers handy when placing an order.
Manual Part Numbers:•Operator’s Manual . . . . . . . . . . . . . . . . 700-108M
•Parts Manual . . . . . . . . . . . . . . . . . . . . 700-108P
General Information
These assembly instructions apply to the following Retro Fit Gearbox Mounting Kits listed below:
700-373A NT Retro Fit Gearbox Mount
700-374A ST Retro Fit Gearbox Mount
Tools required:
•Safety Glasses
•Work Gloves
•Center Punch
•Hammer
•Drill with 1/8" & 11/32" Drill Bits
•Torque wrench with required sockets listed below
•7/16" Socket and box end or open end wrench
•1/2" Socket and box end or open end wrench
•9/16" Socket and box end or open end wrench
•M22 Socket and box end or open end wrench
•3/16" Hex socket wrench
A detailed listing of parts for each accessory kit is provided on page 5. Use the list that is for your Treker as a checklist to inventory parts received. Please contact your local Land Pride dealer for any missing hardware.
Initial Preparations
1.Park vehicle on a flat surface, move gear shift lever to forward, set park brake, lock the cargo box in the up position, turn off engine and remove ignition key.
2.Chock front and back of front tires to prevent the vehicle from rolling.
3.See Operator’s Manual
Refer to Figure 1:
4.Remove M14 hex nut and hex head cap screw (#1).
1
23676
Description
Figure 1
Refer to Figure 2:
5. Rotate shock back to access gearbox components.
23677
Description
Figure 2
© Copyright 2005 | Pr inted | 6/14/05 | 1 |