Shredder Kit
| For RC(M)5515 & RC(M)6515 Rotary Cutters | Manual No. | ||||
|
|
|
|
|
| |
| Before You Start |
| Further Assistance | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When you see this symbol, the subsequent
!instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it!
IMPORTANT: Before you begin, read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation instructions for future reference and parts ordering information.
Your Shredder Kit is exclusively designed for your Land Pride 55 and 65 Series Rotary Cutter. Please read these installation instructions and your Rotary Cutter Operator’s Manual thoroughly before beginning. Especially read information relating to safety concerns. Also included in the Operator’s Manual is important information on operation, adjustment, troubleshooting, and maintenance for this attachment (some manual sections do not apply to all accessories).
A separate Rotary Cutter Parts Manual is available free of charge at www.landpride.com or can be purchased from your nearest Land Pride dealer. Have the model and serial numbers of your cutter handy when placing an order.
Manual Part Numbers:•Operator’s Manual . . . . . . . . . . . . . . . . .
•Parts Manual . . . . . . . . . . . . . . . . . . . . .
General Information
These assembly instructions apply to the Shredder Kit listed below:
NOTE: Land Pride recommends safety glasses and work gloves be worn while working on the Rotary Cutter.
Your dealer wants you to be satisfied with your new Shredder Kit. If for any reason you do not understand any part of this manual or are not satisfied with the service received, the following actions are suggested:
1.Discuss the matter with your dealership service manager making sure he is aware of any problems you may have and that he has had the opportunity to assist you.
2.If you are still not satisfied, seek out the owner or general manager of the dealership, explain the problem and request assistance.
3.For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks.
lpservicedept@landpride.com
Safety Information
!WARNING
Never work under equipment supported by hydraulics. Hydraulics can drop equipment if controls are actuated or if hydraulic lines burst. Either situation can drop the cutter instantly even when power to the hydraulics is shut off.
!DANGER
Always disconnect main driveline from tractor PTO before servicing the cutter deck. Cutter can be engaged if tractor is started resulting in damage to the cutter, bodily injury and/or death.
Shredder Assembly Instructions
A detailed listing of parts for this accessory kit is provided on page 4. Use the list as a checklist to inventory parts received. Please contact your local Land Pride dealer for any missing hardware.
IMPORTANT: Read “Safety Information” above before installing the shredder blades.
Refer to Figure 2 on page 2:
1.Remove all three existing blade carrier assemblies from the gearbox output shafts. Keep flat washers (D), slotted hex nuts (E) and cotter pins (F) for reuse.
© Copyright 2007 | Pr inted | 8/20/07 | 1 |