Table of Contents

Land Pride

Section 5 Maintenance and Lubrication

Section 5 Maintenance and Lubrication

Maintenance

FD1560 V-BELT INSTALLATION

! CAUTION

Refer to Figure 5-2:

1.

Remove belt covers. Loosen spring take-up eyebolt to

For Safety reasons, each maintenance operation must be

 

remove belt tension.

performed with the tractor’s PTO disengaged, the mower

2.

Move belt take-up handle in a clockwise direction to

lowered completely, tractor engine shut off and ignition key

removed.

 

relieve tension on belt.

General Description

3.

With tension relieved from belt remove old belt from

 

pulleys.

Proper servicing and adjustment is the key to the long life

4.

Install new belt referring to the figure below (or refer to

of any farm implement. With careful and systematic

 

the decal on top of mower deck). Be sure belt is

inspection, you can avoid costly maintenance, time and

 

positioned in all the pulley grooves. Tighten belt take-

repair.

 

up handle spring eyebolt to apply tension to new belt.

General Maintenance

5.

Reinstall all belt covers and secure in place with

 

 

hardware.

Blade Sharpening

1. Blades should be sharpened at each end to the same angle as the original cutting edge.

NOTE: Care should be taken in order not to remove any more material than necessary to sharpen blade.

2. Balance each blade after sharpening.

Blade Replacement

 

IMPORTANT: Always install blade with cutting edge

 

facing direction of blade spindle rotation.

FD1560 V-Belt Installation

1. Remove cap screw and blade washer from blade to be

Figure 5-2

replaced. Remove blade.

 

2. Install blade washer into center hole on blade.

Belt Tension

3. Replace cap screw. Tighten bolts to proper torque,

! CAUTION

see the "Torque Values Chart for Common Bolt

Sizes" section on page 19.

IMPORTANT: Replace blades with Land Pride blades

Belt drive system under spring tension; use care to avoid bodily

only.

harm!

 

FD1548 V-BELT INSTALLATION

Refer to Figure 5-1:

1.Remove right hand, left hand and center belt covers.

2.Using 3/4" socket wrench, pivot over-center latch. Rotate idler pulley toward rear of mower.

3.With tension relieved from belt remove old belt from pulleys.

4.Install new belt referring to the figure below (or refer to the decal on top of mower deck). Be sure belt is positioned in all the pulley grooves. Reinstall over- center latch using socket wrench. Recheck spring tension.

5.Reinstall all belt covers and secure in place with hardware.

FD1548 V-Belt Installation

Figure 5-1

1.Belt tension should be checked after approximately 20 hours of operation on a new belt.

2.Not enough tension on the belt may lead to premature failure of the belt due to excessive slipping of the belt.

Refer to “Belt Tension” page 12 for proper adjustment of belt tension.

!WARNING

Excessive tension on the belt may lead to premature failure of belt and drive components. Excessive tension on the belt may also lead to a safety hazard to the operator or bystanders.

AIR TIRES (AIR PRESSURE):

Tire Sealant: Heavy Duty tire sealant has been added in Air tires to help reduce air loss from punchers due to nails/thorns etc.

NOTE: Under inflated tires can roll off of rim. Maintaining air pressure within 5 PSI of maximum tire pressure reduces the risk of tires rolling off of rim.

14 FD1548 & FD1560 3-Spindle Grooming Mower 310-155M

7/18/08

Page 16
Image 16
Land Pride fd1548 manual General Description, General Maintenance

fd1548 specifications

The Land Pride FD1548 is a robust and versatile finishing mower designed to deliver exceptional cutting performance for landscaping and turf management. Built with durability in mind, this mower is perfect for both commercial and residential applications, making it a popular choice among professional landscapers and homeowners alike.

One of the standout features of the FD1548 is its cutting width of 48 inches, which allows for efficient mowing in smaller or more compact areas while still achieving a professional finish. This mower is equipped with three high-quality, heat-treated blades that ensure clean and precise cuts. These blades can be easily replaced or sharpened, extending the mower's longevity and maintaining optimal performance.

The FD1548 utilizes a floating deck design that allows the mower to contour to the ground's surface, effectively handling uneven terrain. This feature significantly reduces the risk of scalping, ensuring an even cut across various grass types and height variations. The mower's adjustable cutting height ranges from one to four inches, offering the flexibility needed to achieve the desired finish for any lawn.

For enhanced durability, the FD1548 is constructed with a heavy-duty frame and reinforced deck. The use of high-quality materials in its design ensures that it can withstand the rigors of constant use while maintaining its integrity over time. Additionally, the mower's powder-coated finish protects against rust and corrosion, making it suitable for various environmental conditions.

The FD1548 is designed for compatibility with standard Category 1 three-point hitches, allowing it to be easily attached to a wide range of tractors, which further enhances its versatility. Its simple greasing points and maintenance-friendly design contribute to hassle-free upkeep, making it an ideal choice for those who prefer a low-maintenance mower.

Another key aspect of the Land Pride FD1548 is its user-friendly operation. The mower is designed with safety features such as blade safety guards and a simple control system that makes it easy for operators of all experience levels to use. This attention to safety, combined with its performance capabilities, makes the FD1548 a valuable tool in any landscaping arsenal.

In summary, the Land Pride FD1548 finishing mower offers a combination of cutting efficiency, durability, and ease of use. Its innovative design and thoughtful features make it an excellent investment for anyone looking to achieve professional-quality mowing results. Whether for commercial landscaping or residential lawn care, the FD1548 stands out as a reliable and effective solution.