Land Pride

Table of Contents

Section 5 Maintenance and Lubrication

Service Mowing Blades

1.Both blades should be sharpened at the same angle as the original cutting edge and must be replaced or reground at the same time to maintain proper balance in the mowing unit.

NOTE: Care should be taken in order not to remove any more material than necessary when sharpening blades.

2.Both blades should weigh the same after sharpening.

3.When replacing or sharpening the mower blades, examine bolts for excessive wear and replace if necessary.

Blade Replacement

IMPORTANT: ALWAYS install blade with cutting edge facing direction of rotor shaft rotation.

1.Remove the cap screw and the blade washer from the blade to be replaced. Remove the blade.

2.Install the blade washer into the center hole on the blade.

3.Replace cap screw and lock washer and tighten bolts to proper torque. See “Torque Values Chart for Common Bolt Sizes“ on page 19.

IMPORTANT: Replace blades with genuine Land Pride blades only.

Storage

At the end of the working season or when the mower will not be used for a long period, it is good practice to clean off any dirt or grease that may have accumulated on the mower and any of the moving parts.

1.Clean as necessary.

2.Check the blades for wear and replace if necessary, see Service Mowing Blades, this section on page 15.

3.Inspect the mower for loose, damaged or worn parts and adjust or replace as needed.

4.Lubricate as noted in the Lubrication portion of this section starting on page 15.

5.Store unit inside if possible for longer life.

Repaint parts where paint is worn or scratched to prevent rust. Ask your dealer for Aerosol Land Pride Beige touch- up paint #821-011C.

Lubrication Legend

Multipurpose

Multipurpose

Multipurpose

50

spray lube

grease lube

oil lube

 

Intervals at which lubrication is required

 

 

 

8

 

 

 

PTO U-Joint

 

 

 

 

Coat PTO u-joint with grease every 8 hours of operation

 

 

 

Type of Lubrication: Multipurpose

 

 

 

12559

Quantity = Coat Generously

 

 

 

 

 

 

 

 

 

20

 

 

PTO Shaft

 

 

 

 

Disconnect PTO shaft from the tractor and slide apart. Clean

 

 

and coat the inner tube of the PTO shaft with a light film of

 

 

grease and then reassemble.

 

 

 

 

Type of Lubrication: Multipurpose

 

 

 

12559

Quantity = Light Film

 

 

 

 

 

 

7/18/08

 

FD1548 & FD1560 3-Spindle Grooming Mower

310-155M

15

Page 16 Page 18
Page 17
Image 17
Land Pride fd1548 manual Service Mowing Blades, Blade Replacement, Storage, PTO U-Joint, PTO Shaft
Page 16 Page 18

fd1548 specifications

The Land Pride FD1548 is a robust and versatile finishing mower designed to deliver exceptional cutting performance for landscaping and turf management. Built with durability in mind, this mower is perfect for both commercial and residential applications, making it a popular choice among professional landscapers and homeowners alike.

One of the standout features of the FD1548 is its cutting width of 48 inches, which allows for efficient mowing in smaller or more compact areas while still achieving a professional finish. This mower is equipped with three high-quality, heat-treated blades that ensure clean and precise cuts. These blades can be easily replaced or sharpened, extending the mower's longevity and maintaining optimal performance.

The FD1548 utilizes a floating deck design that allows the mower to contour to the ground's surface, effectively handling uneven terrain. This feature significantly reduces the risk of scalping, ensuring an even cut across various grass types and height variations. The mower's adjustable cutting height ranges from one to four inches, offering the flexibility needed to achieve the desired finish for any lawn.

For enhanced durability, the FD1548 is constructed with a heavy-duty frame and reinforced deck. The use of high-quality materials in its design ensures that it can withstand the rigors of constant use while maintaining its integrity over time. Additionally, the mower's powder-coated finish protects against rust and corrosion, making it suitable for various environmental conditions.

The FD1548 is designed for compatibility with standard Category 1 three-point hitches, allowing it to be easily attached to a wide range of tractors, which further enhances its versatility. Its simple greasing points and maintenance-friendly design contribute to hassle-free upkeep, making it an ideal choice for those who prefer a low-maintenance mower.

Another key aspect of the Land Pride FD1548 is its user-friendly operation. The mower is designed with safety features such as blade safety guards and a simple control system that makes it easy for operators of all experience levels to use. This attention to safety, combined with its performance capabilities, makes the FD1548 a valuable tool in any landscaping arsenal.

In summary, the Land Pride FD1548 finishing mower offers a combination of cutting efficiency, durability, and ease of use. Its innovative design and thoughtful features make it an excellent investment for anyone looking to achieve professional-quality mowing results. Whether for commercial landscaping or residential lawn care, the FD1548 stands out as a reliable and effective solution.
Top Page Image Contents