Table of Contents
Land Pride
Important Safety Information
Use Safety
Lights and Devices
▲Slow moving tractors, self- propelled equipment, and towed implements can create a hazard when driven on public roads. They are difficult to see, especially at night.
▲Flashing warning lights and turn signals are recommended whenever driving on public roads. Use lights and devices provided with implement.
Transport
Machinery Safely
▲Comply with state and local laws.
▲Maximum transport speed for implement is 20 mph. DO NOT EXCEED. Never travel at a speed which does not allow adequate control of steering and stopping. Some rough terrains require a slower speed.
▲Sudden breaking can cause a towed load to swerve and upset. Reduce speed if towed load is not equipped with brakes.
▲Use the following maximum speed - tow load weight ratios as a guideline:
▲20 mph when weight is less than or equal to the weight of tractor.
▲10 mph when weight is double the weight of tractor.
▲IMPORTANT: Do not tow a load that is more than double the weight of tractor.
Practice Safe Maintenance
▲Understand procedure before doing work. Use proper tools and equipment, refer to Operator’s Manual for additional information.
▲Work in a clean dry area.
▲Lower the implement to the ground, put tractor in park, turn off engine, and remove key before preforming maintenance.
▲Allow implement to cool completely.
▲Install all transport locks on raised drill before working underneath, refer to the Operator’s Manual for quantity and location of transport locks.
▲Do not grease or oil implement while it is in operation.
▲Move the opener handle to the “ROAD” position and complete raising the openers to lock them up before working underneath them.
▲Disk edges are sharp. Be careful when working in this area.
▲Disconnect battery ground cable
▲Inspect all parts. Make sure parts are in good condition & installed properly.
▲Remove buildup of grease, oil or debris.
▲Remove all tools and unused pars from implement before operation.
2 | FD1548 & FD1560 | 7/18/08 |
