Land Pride

Table of Contents

Section 1: Assembly and Set-Up

Tractor Requirements

The Powered Rake is designed with a category 1, 3-point hitch and will fit a Land Pride Cat. 1 Quick-Hitch. The maximum horsepower rating for the tractor is 45 HP depending on lift capacity and field conditions. Front tractor weights and/or ballast to tires may be required to offset weight of unit. Consult your tractor manual for details.

!WARNING

Hydraulic fluid under pressure can penetrate skin. Wear protective gloves and safety glasses or goggles when working with hydraulic systems. Use a piece of cardboard or wood rather than hands when searching for hydraulic leaks. If hydraulic fluid is injected into the skin, it must be surgically removed within a few hours by a doctor or gangrene may result.

Gauge Wheel Assembly (PR1572)

Refer to Figure 1-1:

PR1572 is shown. On the PR1560 the gauge wheel arms are part of the frame.

1.Install the gauge wheels (#1) to the frame with the u- bolts (#2) lock washers (#3) and nuts (#4) as shown.

18602

Gauge Wheel

Figure 1-1

Tractor Hook-Up

!CAUTION

Do not stand between the tractor and implement during hook-up.

1.Be certain that the tractor draw bar will not interfere. Move draw bar ahead or remove if required. Draw bar should also be checked for clearance when unit is being raised for the first time.

2.Align lower link arms of tractor to hitch lugs on Powered Rake. Insert lower hitch pins into lower ball swivels and attach linch pins.

3.Attach tractor top link to upper hitch of Powered Rake. Secure with pin.

4.Connect hydraulic hoses on Powered Rake to the tractor.

Driveline Installation

1.Slide the driveline over the splined shaft at the front of the Powered Rake and secure with the locking device of driveline.

IMPORTANT: The inner shield half attaches to the Powered Rake.

2.Slide the driveline over the tractor’s splined PTO shaft and secure with the locking device of driveline.

3.Hook the safety chain on the driveline Powered Rake end around a tube on the front of the Powered Rake to prevent the shield from rotating.

4.The driveline should now be moved back and forth to insure that it is secure on the PTO shaft of the tractor and Powered Rake drive shaft.

5.Should the driveline require shortening:

a.Hold the half-shafts next to each other in the shortest working position and mark them.

b.Shorten inner and outer guard tubes equally.

c.Shorten inner and outer sliding profiles by the same length as the guard tubes.

d.Proper overlap is a minimum of one-half the length of each tube, with both tubes being of equal length.

e.Round off all sharp edges and remove burrs. Grease sliding profiles.

Prior to initial operation and after long periods of inactivity, the Friction Clutch should be “run-in”. Refer to Figure 1-2.

1.Tighten all 4 nuts uniformly until the spring load is low enough that the clutch slips freely with the PTO engaged.

2.Turn nuts fully back. Clutch is ready for use.

10103

Friction Clutch “Run In”

Figure 1-2

7/14/08

PR1560 & PR1572 Powered Rakes 314-164M

9

Page 11
Image 11
Land Pride PR1560 manual Tractor Requirements, Gauge Wheel Assembly PR1572, Tractor Hook-Up, Driveline Installation

PR1560 specifications

The Land Pride PR1560 is an exceptional piece of equipment that has become increasingly popular among landowners and farmers seeking an efficient and reliable rotary cutter. Designed for versatility and durability, the PR1560 is perfect for clearing overgrown fields, managing underbrush, and maintaining pastures. Its robust construction and innovative features make it a go-to choice for a variety of mowing applications.

One of the main features of the Land Pride PR1560 is its cutting width of 60 inches, allowing operators to cover large areas in a relatively short amount of time. This size is ideal for both residential and commercial applications, making it suitable for everything from homeowners maintaining rural properties to professional landscapers. The rotary cutter is designed to handle tough grass and light brush, effectively tackling dense vegetation with ease.

The PR1560 incorporates a heavy-duty design that ensures longevity and reliable performance. Built with a solid steel frame and reinforced sidebands, it can withstand the rigors of regular use. The cutter features a balanced rotor that helps reduce vibrations, providing operators with a smoother mowing experience. In addition, the cutting blades are crafted from high-strength steel, which can provide a clean cut while resisting wear and tear.

In terms of technology, the Land Pride PR1560 employs a slip clutch protection system, which helps to protect the drive train during unexpected encounters with rocks or other obstacles. This technology reduces the likelihood of damage to the rotary cutter, thus minimizing maintenance costs and enhancing the overall lifespan of the equipment. Operators can also easily adjust the cutting height, ranging from 1 to 4 inches, to achieve their desired mowing results.

Another significant characteristic of the PR1560 is its compatibility with a range of tractors. It features an easy-to-use three-point hitch system, which allows for quick attachment and detachment. This ease of use ensures that operators can switch between tasks efficiently, maximizing productivity.

In summary, the Land Pride PR1560 rotary cutter is an outstanding choice for anyone in need of a robust and efficient mowing solution. Its durable construction, advanced features, and compatibility with various tractors make it a versatile asset for land maintenance and management. Whether you’re tackling overgrown fields or maintaining pastures, the PR1560 delivers the performance and reliability that operators demand.