Table of Contents

Section 4: Maintenance and Lubrication

Maintenance

!CAUTION

BEFORE any maintenance is performed, lower the Powered Rake to the ground, stop tractor engine and remove key. DO NOT attempt to make maintenance adjustments while tractor is running.

IMPORTANT: Proper servicing and adjustment is the key to the long life of any machine. With careful and systematic inspection of the Powered Rake, costly maintenance, time and repair can be avoided.

Storage

At the end of the working season or when the Powered Rake will not be used for a long period, it is good practice to clean off any dirt or grease that may have accumulated on any of the moving parts.

Check the roller studs or bars for wear and replace the roller and/or studs if necessary.

Inspect the Powered Rake for loose, damaged or worn parts and adjust or replace if needed.

Lubricate as noted in “Lubrication” on page 14.

Repaint parts where paint is worn or scratched to prevent rust.

Drain gearbox and chain case oil. Drain oil in gearbox by removing the bottom drain plug. Drain oil in chain case by removing bottom cover (#2) Figure 5-2. Be sure to refill gearbox and chain case at this time.

Apply a light coat of grease to any exposed hydraulic cylinder rod.

Store Powered Rake in a clean, dry place.

Drive Chain Maintenance

The operator should check periodically to make sure that the drive chain is tight. If adjustment is needed refer to “Drive Chain Adjustment” on page 11.

Chain Case Skid Shoe Replacement

IMPORTANT: If chain case skid shoe needs to be replaced, it is important that the carriage bolt threads and nuts are coated generously with Sikaflex. This will insure that there is no oil leakage from chain case.

18013

Sprocket & Drive Chain Replacement

Refer to Figure 5-2:

1. Remove cover plate (#1) and bottom plate (#2).

NOTE: Oil in chain case! Be prepared to capture oil when taking off bottom cover.

2.Loosen chain tension by removing spring (#3) from idler arm.

3.Remove nut (#4) on and/or (#5) sprockets.

4.Remove sprockets and chain.

5.Install new chain and sprockets.

6.Reinstall nut (#4) and (#5).

7.Reinstall spring (#3).

8.Turn the roller several turns and observe the chain to make sure everything is working properly.

9.Reinstall cover plate (#1) and bottom plate (#2).

10.Check the oil level in the chain case. See “Lubrication” on page 14.

18644

Sprocket and Drive Chain Replacement

Figure 5-2

2-Plate Slip Clutch

NOTE: Before proceeding, secure the clutch firmly in a vise or other clamping device to prevent injury.

Chain Case Skid Shoe Replacement

Figure 5-1

12 PR1560 & PR1572 Powered Rakes 314-164M

7/14/08

Page 14
Image 14
Land Pride PR1560 manual Storage, Drive Chain Maintenance, Chain Case Skid Shoe Replacement, Plate Slip Clutch

PR1560 specifications

The Land Pride PR1560 is an exceptional piece of equipment that has become increasingly popular among landowners and farmers seeking an efficient and reliable rotary cutter. Designed for versatility and durability, the PR1560 is perfect for clearing overgrown fields, managing underbrush, and maintaining pastures. Its robust construction and innovative features make it a go-to choice for a variety of mowing applications.

One of the main features of the Land Pride PR1560 is its cutting width of 60 inches, allowing operators to cover large areas in a relatively short amount of time. This size is ideal for both residential and commercial applications, making it suitable for everything from homeowners maintaining rural properties to professional landscapers. The rotary cutter is designed to handle tough grass and light brush, effectively tackling dense vegetation with ease.

The PR1560 incorporates a heavy-duty design that ensures longevity and reliable performance. Built with a solid steel frame and reinforced sidebands, it can withstand the rigors of regular use. The cutter features a balanced rotor that helps reduce vibrations, providing operators with a smoother mowing experience. In addition, the cutting blades are crafted from high-strength steel, which can provide a clean cut while resisting wear and tear.

In terms of technology, the Land Pride PR1560 employs a slip clutch protection system, which helps to protect the drive train during unexpected encounters with rocks or other obstacles. This technology reduces the likelihood of damage to the rotary cutter, thus minimizing maintenance costs and enhancing the overall lifespan of the equipment. Operators can also easily adjust the cutting height, ranging from 1 to 4 inches, to achieve their desired mowing results.

Another significant characteristic of the PR1560 is its compatibility with a range of tractors. It features an easy-to-use three-point hitch system, which allows for quick attachment and detachment. This ease of use ensures that operators can switch between tasks efficiently, maximizing productivity.

In summary, the Land Pride PR1560 rotary cutter is an outstanding choice for anyone in need of a robust and efficient mowing solution. Its durable construction, advanced features, and compatibility with various tractors make it a versatile asset for land maintenance and management. Whether you’re tackling overgrown fields or maintaining pastures, the PR1560 delivers the performance and reliability that operators demand.