Land Pride RCM45180, RC45180 manual Driveline Shaft, Drive line Shafts, PTO Constant Velocity Shaft

Land Pride Table of Contents

Section 5 Maintenance and Lubrication

14191

12725

10

Driveline Shaft

Type of Lubrication: Multi Purpose

Quantity = Coat Generously

25

Drive line Shafts

Type of Lubrication: Multipurpose Grease

12726

8

PTO Constant Velocity Shaft

Type of Lubrication: Multipurpose Grease

NOTE: To extend the life of the constant velocity joint, extensive lubrication must be performed every 8 hours of operation!

a.The constant velocity joint should be greased in a straight position forcing grease through the passages and into the cavity. After lubrication, grease should be visible around the ball joints.

b.The constant velocity driveline comes equipped with a grease zerk in the outer telescoping member and must be greased every 8 hours to prevent premature failure of the joint.

c.Grease fittings are located on the u-joints and driveline shields and should be lubricated every 8 hours of operation.

7/14/08 RC45180 & RCM45180 Rotary Cutter 312-382M 21