Land Pride

Table of Contents

Section 7: Maintenance & Lubrication

Blade Rotation

12271

Figure 7-4

 

Blade Rotation is clockwise. See Figure 7-4.

The Skid Shoes should be inspected at the beginning of each cutting season. Original material thickness is 1/4". They should be replaced when the material thickness is less than 1/8" at any point. The skid shoes are interchangeable from left to right.

Tractor Maintenance

IMPORTANT: One of the most important things you can do to prevent hydraulic system problems is to ensure that your tractor's reservoir remain free of dirt and contamination. Use a clean cloth to wipe the hose ends before attachment to your tractor.

Replace the filter element for your tractors hydraulic system at the prescribed intervals. Doing so will go a long way to prevent the occurrence of cartridge valve and hydraulic cylinder problems on the Parallel Arm Cutter.

NOTE: Removal of the solenoid valves from the valve block requires the removal of a 1/2" hex nut on the end of the solenoid armature. Use care when removing/replacing this nut. Use Locktite or other thread locking compound when replacing and DO NOT exert more than 3 ft lbs of torque on this hex nut. Remember that 3 ft lbs is slightly higher than finger tight! See Figure 7-5.Overtightening this nut will distort the hollow armature shaft and may result in valve failure. See Solenoid Valve Block

12272

Solenoid Valve Block

Figure 7-5

Storage

At the end of the working season or when the cutter will not be used for a long period, it is good practice to clean off any dirt or grease that may have accumulated on the cutter and any of the moving parts. It may be necessary to scrape off compacted dirt from the bottom of the deck, then use a garden hose to thoroughly clean the surface. A coating of oil may also be applied to the lower deck area to minimize oxidation.

Check the blades and blade bolts for wear and replace if necessary. See “Section 7: Maintenance & Lubrication” on page 27.

Inspect the cutter for loose, damaged or worn parts and adjust or replace if needed.

Lubricate as noted in “Section 7: Maintenance & Lubrication” on page 27.

Repaint parts where paint is worn or scratched to prevent rust. Aerosol Buckskin touch-up paint is available from your Land Pride Dealer. Order Land Pride part #821- 011C.

Store the cutter in a clean, dry place. The deck should be positioned on a flat surface with the arms retracted and the jack stands lowered to suitable 3-Point height.

Ensure that the main frame is stable. Use auxiliary supports or posts if necessary to prevent the possibility of the unit tipping over.

4/28/08

RCP2560 & RCPM2560 Series Parallel Arm Rotary Cutter 316-057M

29

Page 30 Page 32
Page 31
Image 31
Land Pride RCPM2560, RCP2560, Parallel Arm Rotary Cutter manual Tractor Maintenance, Storage
Page 30 Page 32

Parallel Arm Rotary Cutter, RCPM2560, RCP2560 specifications

The Land Pride RCP2560 and RCPM2560 Parallel Arm Rotary Cutters represent a significant advancement in agricultural and landscaping equipment, designed to efficiently tackle a variety of mowing tasks. These rotary cutters are ideal for maintaining pastures, roadsides, and large fields while offering enhanced durability and performance.

One of the main features of the RCP2560 and RCPM2560 is their robust construction. Built with a heavy-duty frame and steel components, these cutters are engineered to withstand the rigors of tough mowing conditions. They feature a fully welded deck to ensure strength and longevity, providing operators with confidence during operation.

A key characteristic of the Parallel Arm design is the ability to deliver consistent cutting performance across varying terrains. This unique design allows the cutter to follow the ground contour closely, ensuring that the blades maintain an even cutting height. This is especially beneficial when navigating uneven or hilly landscapes, delivering a professional-quality finish.

The RCP2560 and RCPM2560 come equipped with high-capacity cutter blades designed for efficient grass and brush cutting. These blades are strategically angled to optimize cutting efficiency while minimizing power consumption. Users can enjoy reduced maintenance costs and longer service intervals because of the durable, replaceable blades.

The technology behind these rotary cutters includes a quick-attach mounting system, making it easier for operators to connect and disconnect the mower from their tractors. This feature saves time and enhances productivity, allowing for quicker transitions between tasks.

Additionally, the RCPM2560 model offers a medium-duty option, catering to operators looking for versatility in their cutting operations. Both models come with adjustable side skids that enable operators to modify the cutting height easily, further enhancing their adaptability for different mowing applications.

Safety is paramount with Land Pride's rotary cutters, which are designed with user-friendly controls and a stable operating design. Optional safety features, such as a chain guard, are available to protect against flying debris, underscoring the focus on operator safety.

In summary, the Land Pride RCP2560 and RCPM2560 Parallel Arm Rotary Cutters bring together durability, efficiency, and user-friendly features to transform landscaping and agricultural mowing tasks. With their advanced technologies and robust construction, these rotary cutters are a valuable investment for any operator looking to achieve superior cutting performance.
Top Page Image Contents