Land Pride RCR1548, RCR1560 manual Danger, Point Hook-Up, Table of Contents, Driveline Installation

Land Pride Table of Contents

Section 1: Assembly and Set-Up

Driveline Installation

Refer to Figure 1-2:

1.Remove the snap ring (#1) from the gearbox input shaft. Slide the driveline (#2) on to the gearbox shaft and replace the snap ring to the gearbox shaft. The snap ring is for extra security in case the shear bolt (#3) should break. Align the holes in the driveline with the hole in the gearbox input shaft and insert the 1/2” x 3 1/2” long bolt (#3) and secure with the 1/2” nut (#4) and 1/2” jam nut (#5).

2.Secure the chain on the driveline to the driveline cone to restrict outer shield from rotating.

16385

3-Point Hook-Up

Refer to Figure 1-3:

!DANGER

Tractor hook-up can be hazardous to your health or that of your helper. Do not allow anyone to stand between the _____

and the tractor during hook-up operations. Do not operate the hydraulic 3-point lift controls while someone is directly behind the tractor.

1.Slowly back the tractor up to the cutter and use the tractor’s 3-point hydraulic control to adjust the lower link arms up or down to match the height of the cutter hitch pins.

2.Slide the the lower link arms hitch link holes onto the cutter hitch pins.

3.Install a linch pin or other fastener (supplied by customer) through the hitch pin hole to lock the lower links into position.

4.Connect the top link to the upper pivot hitch using the 3/4" clevis pin supplied.

Driveline Installation

Figure 1-2

16386

Tractor Hook-Up

Figure 1-3

12/28/05 RCR1542, RCR1548, RCR1560 and RCR1572 Rotary Cutters 312-556M 9