Land Pride SPS20, SPS30 manual Transporting the Loader and Attachment, Getting On and Off Safely

Models: SPS30 SPS20

1 30
Download 30 pages 17.87 Kb
Page 4
Image 4
Transporting the Loader and Attachment

Land Pride

Important Safety Information

These are common practices that may or may not be applicable to the products described in this manual.

Transporting the Loader and Attachment

Always drive up the ramp with heavy end uphill. Engage parking brake.

Secure loader and attachments using tiedowns and chains. Use towing vehicle and trailer of adequate capacity.

Getting On and Off Safely

Before leaving the operator’s seat:

Lower lift arms and put attachment flat on the ground.

Stop the engine.

Engage the parking brake.

Raise seat bar and move controls until both lock.

Remove the key to prevent unauthorized starting.

Use the steps, grab-handles and skid-resistant surfaces when getting on or off the loader.

While Operating

Start loader with steering levers and hydraulic controls in neutral.

Keep bystanders away.

Practice Safe Maintenance

Understand procedure before doing work. Use proper tools and equipment, refer to Operator’s Manual for additional information.

Work in a clean dry area.

Allow implement to cool completely.

Do not grease or oil implement while it is in operation.

Disconnect battery ground cable (-) before servicing or adjusting electrical systems or before welding on implement.

Inspect all parts. Make sure parts are in good condition & installed properly.

Remove buildup of grease, oil or debris.

Remove all tools and unused parts from implement before operation.

2

SPS20 & SPS30 Series Pulverizer Seeders 313-242M

6/26/02

Page 4
Image 4
Land Pride SPS20, SPS30 manual Transporting the Loader and Attachment, Getting On and Off Safely, While Operating