Manuals / Land Pride / Lawn and Garden / Spreader

Land Pride SPS30, SPS20 Shanks, Shank Working Depth, Clutch Engagement Disengagement, Adjustments

Models: SPS30 SPS20

1 30

Download 30 pages 17.87 Kb

Page 13

Image 13

Land Pride

Section 3 Adjustments

Shanks

Refer to Figure 3-4:

Shanks can be removed & installed upside down to give dual life to shanks.

1.Remove bolt and nut (#1) from one end of pulverizer.

2.Pull rod (#2) from channel.

3.Flip shanks (#3) over and reinstall rod (#2)

4.Reinstall bolt and nut (#1).

Shank Working Depth

The working depth of the shanks can be adjusted by the gauge wheels.

Place spacers (#2) & (#3) at desired height and secure with pin (#4).

Shanks	Shank Working Depth	18547
Shanks	Shank Working Depth
Figure 3-4	Figure 3-5

Clutch Engagement (Disengagement)

The Clutch can be engaged by turning the pin until the pin slides in the groove. Disengage by pulling out on the pin and turning it until it is out of the groove. (Engaged for seeding.)

Clutch Engagement

Figure 3-6

18492

6/26/02

SPS20 & SPS30 Series Pulverizer Seeders 313-242M

Page 13

Image 13

Land Pride SPS30, SPS20 manual Shanks, Shank Working Depth, Clutch Engagement Disengagement, Adjustments, Refer to Figure

Contents

Pulverizer Seeders you see this symbol, the subsequentSPS20 & SPS30 Series Operator’s ManualSection 1 Assembly and Set-Up Table of ContentsSection 3 Seeding Adjustments Section 4 Maintenance and LubricationBe Aware of Signal Words Important Safety InformationKeep Riders Off Machinery For Your ProtectionTransporting the Loader and Attachment Practice Safe MaintenanceGetting On and Off Safely While OperatingPrepare for Emergencies Safety at All TimesWear Protective Equipment Avoid High Pressure Fluids HazardImportant Safety Information Safety Labels818-543C Danger Guard Missing Beneath Chain Guard 838-111C Danger Keep AwayService Department Using This ManualApplication Owner AssistanceSection 1 Assembly and Set-Up Gauge Wheel AssemblyOperating Check List Tractor RequirementsTractor 3-Point Hookup Seeder Preparation and UseDrive System ParkingOperating Instructions Section 2 OperatingSection 3 Adjustments Seeding AdjustmentsSeed Rate Speed Change Refer to Figure Roller Down PressureSection 3 Adjustments Shank Working Depth ShanksClutch Engagement Disengagement Section 3 AdjustmentsCup Setting Seed Rate Chart for SPS2048Section 3 Adjustments Land PrideCup Setting Section 3 AdjustmentsLand Pride SPS20 & SPS30 Series Pulverizer Seeders 313-242MSection 3 Adjustments Seed Rate Chart Metric Units for SPS2048Cup Setting Land PrideCup Setting Section 3 AdjustmentsLand Pride SPS20 & SPS30 Series Pulverizer Seeders 313-242MSection 3 Adjustments Seed Rate Chart for SPS3072Cup Setting Land PrideCup Setting Section 3 AdjustmentsLand Pride SPS20 & SPS30 Series Pulverizer Seeders 313-242MSection 3 Adjustments Seed Rate Chart Metric for SPS3072Cup Setting Land PrideCup Setting Section 3 AdjustmentsLand Pride SPS20 & SPS30 Series Pulverizer Seeders 313-242MSection 4 Maintenance and Lubrication MaintenanceStorage LubricationRoller Chains 4 chains Wheel BearingsSection 4 Maintenance and Lubrication Land PrideSection 5 Speciﬁcations and Capacities Section 5 Speciﬁcations and Capacities 6 5/8” Dia. spiked roller with clean brush. 1” sealed bearing mountedSection 6 Features and Beneﬁts Problem Section 7 TroubleshootingSolution Actual seeding rate is different thanSection 8 Appendix Tire Inflation ChartTire Size Inflation PSISection 8 Appendix WarrantyCorporate Ofﬁce PO. Box 5060 Salina, Kansas 67402-5060 USA