Lanner electronic 19" 1U Intel Pentium 4 Socket T Rackmount Network Security Platform, FW-7870

A p p e n d i x C

Console Redirection

Console redirection allows you to maintain a system from a remote location by re-directing keyboard input and text output through the serial port. This section will tell you how to use console redirection.

1.Please insert console cable between on FW-7870 and Remote Client System.

2.Setup BIOS in FW-7870.

BIOS Æ Advanced Chipset Features Æ Baud Rate : 115200 (Default)

BIOS Æ Advanced Chipset Features Æ Console Redirection : Enabled(Default)

Enabled	Attempt to redirect console via COM port.
Disabled	Attempt to redirect console when keyboard absent.
	If keyboard is plug in the Controller board, the Console Redirection
Auto	will not display BIOS screen on remote client.
	If keyboard is not plug in the Controller board, the Console
	Redirection will display BIOS screen on remote client.

3.Configure Console redirection on client system. This example is for Windows platform.

i. Click the Start button, point to programs Æ Accessories Æ Communications, and click Hyper Terminal.

ii.Enter any name for the new connection and select any icon.

iii.Click OK.

iv.From the Connect to pull-down menu, select a COM port available on your client system and click OK.

v.Select Baud Rate Æ 115200 , Flow control ÆNone , Data bitÆ8 , Parity check Æ None , Stop bit Æ 1.

4.Power on FW-7870 and it will display the bios information on the client system.