3.7 Power Management Setup
The Power Management Setup allows you to configure you system to most effectively save energy while operating in a manner consistent with your own style of computer use.
ACPI Function : This item allows you to enable or disable the Advanced Configuration and Power Management (ACPI). The settings are “Enabled” and “Disabled”.
Power managemant : This option allows you to select the type (or degree) of power saving for Doze, Standby, and Suspend modes.
This table describes each power management mode:
Max Saving | Maximum power savings. Only Available for SL CPUs. |
User Define | Set each mode individually. |
Min Saving | Minimum power savings. |
Video Off Method
This determines the manner in which the monitor is blanked.
V/H | This selection will cause the system to turn off the vertical and horizontal |
SYNC+Blank | synchronization ports and write blanks to the video buffer. |
Blank Screen | This option only writes blanks to the video buffer. |
DPMS | Initial display power management signaling. |
Video Off In Suspend
This determines the manner in which the monitor is blanked.
Configuration options:
Suspend Type
Select the Suspend Type.Configuration options: PWRON Suspend / Stop Grant
