Onkyo TX-SR8370, TX-SR803 Equalizer Settings, Advanced Setup—Continued, Setup closes, Notes

5_Advanced_En Page 75 Monday, August 29, 2005 5:23 PM

Advanced Setup—Continued

Equalizer Settings

These settings are set automatically by the Automatic Speaker Setup function (see page 40).

With these settings, you can adjust the tone of each speaker. The volume of each speaker can be set on page 73.

1	RECEIVER	Press the [RECEIVER] REMOTE
		MODE button, followed by the

[SETUP] button.

The main menu appears onscreen.

5

ENTER

ENTER

Use the Down [ ] button to select “b. Channel,” and then use the Left and Right []/[ ] but- tons to select a speaker.

3-6.Equalizer Settings

------------------------

a.Use Settings:Manual

------------------------

b.Channel :Left

------------------------

c.	80Hz	: 0dB
d. 250Hz		: 0dB
e. 800Hz		: 0dB
f.2.5kHz		: 0dB
g.	8kHz	: 0dB

2	Use the Up and Down [ ]/[ ]
	buttons to select “3. Speaker

6	Use the Up and Down [ ]/[ ]
	buttons to select a frequency,
ENTER	and then use the Left and Right
	[ ]/[ ] buttons to cut or boost
	that frequency.

ENTER

ENTER

Setup,” and then press [ENTER].

The Speaker Setup menu appears.

Each band can be cut or boosted from –6 dB to +6 dB in 1 dB steps.

Tip: Low frequencies (e.g., 80Hz) affect bass sounds; high frequencies (e.g., 8kHz) affect treble sounds.

7	Use the Up [ ] button to select
	“b. Channel,” and then use the

3	Use the Up and Down [ ]/[ ]
	buttons to select “Equalizer Set-

ENTER	Left and Right [ ]/[ ] buttons to
	select another speaker.
	Repeat steps 6 and 7 for each speaker.

ENTER

ENTER

tings,” and then press [ENTER].

The Equalizer Settings menu appears.

ENTER

8	Press the [SETUP] button.
	Setup closes.

4 Use the Left and Right [ ]/[ ] buttons to set the “a. Use Set- tings” option to:

ENTER	Off: Equalizer off, flat response.
	Auto: The equalizer for each
	speaker is set automatically
	by the Automatic Speaker
	Setup function.
	Manual: The equalizer for each
	speaker can be set manually.
	If you selected Manual, continue with
	the next step. If you selected Off or
	Auto, go to step 8.

Notes:

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

•On the TX-SR803/803E, the Equalizer Settings have no effect on 176.4/192 kHz signals.

75